SnSxSe2-x单晶纳米片的可控制备与表征

锡二硫族化合物可以通过改变硫和硒的含量来连续调控三元合金材料的带隙、载流子浓度等物理化学性质,在电子和光电子器件应用上具有巨大的潜力。本文采用化学气相沉积(CVD)技术可控地制备了不同元素组分的SnS_xSe_2-x(x=0,0.2,0.5,0.8,1.0,1.2,1.5,1.8,2.0)单晶纳米片。采用扫描电子显微镜(SEM)、原子力显微镜(AFM)、能量色散X射线光谱(EDS)、透射电子显微镜(TEM)以及拉曼光谱等手段对SnS_xSe_2-x纳米片进行了综合表征。结果表明本方法成功实现了元素百分比可调的SnS_xSe_2-x单晶纳米片的可控制备。重点研究了依赖于元素百分比的SnS_xSe_2-x的拉曼特征谱,实验结果与基于密度泛函理论(DFT)的第一性原理计算得到的SnS_xSe_2-x的拉曼仿真谱高度吻合,理论计算结果较好地诠释了实验拉曼光谱发生变化的原因。本研究提供了一种元素百分比可调的三元SnS_xSe_2-x单晶纳米片的可控制备方法,同时对锡二硫族化合物的明确、无损识别提供了方案。     

Euler Characteristics on virtually free products

We define Euler characteristics on classes of residually finite and virtually torsion free groups and we show that they satisfy certain formulas in the case of amalgamated free products and HNN extensions over finite subgroups. These formulas are obtained from a general result which applies to the rank gradient and the first L²?Betti number of a finitely generated group.     

Solvability of a nonlinear fifth‐order difference equation

Some formulas for well‐defined solutions to four very special cases of a nonlinear fifth‐order difference equation have been presented recently in this journal, where some of them were proved by the method of induction, some are only quoted, and no any theory behind the formulas was given. Here, we show in an elegant constructive way how the general solution to the difference equation can be obtained, from which the special cases very easily follow, which is also demonstrated here. We also give some comments on the local stability results on the special cases of the nonlinear fifth‐order difference equation previously publish in this journal.     

TFSI钝化晶体硅表面性质的第一性原理研究

晶体硅表面钝化是高效率晶体硅太阳能电池的核心技术,直接影响晶体硅器件的性能。本文采用第一性原理方法研究了一种超强酸-双三氟甲基磺酰亚胺(TFSI)钝化晶体硅(001)表面。研究发现,TFSI的四氧原子结构能够与Si(001)表面Si原子有效成键,吸附能达到-5.124 eV。电子局域函数研究表明,TFSI的O原子与晶体硅表面的Si的成键类型为金属键。由态密度和电荷差分密度分析可知,Si表面原子的电子向TFSI转移,从而有效降低了Si表面的电子复合中心,有利于提高晶体硅的少子寿命。Bader电荷显示,伴随着TFSI钝化晶体硅表面的Si原子,表面Si原子电荷电量减少,而TFSI中的O原子和S原子电荷电量相应增加,进一步证明了TFSI钝化Si表面后的电子转移。该工作为第一性原理方法预测有机强酸钝化晶体硅表面的钝化效果提供了数据支撑。     

A Theoretical study on the charge and discharge states of Na-ion battery cathode material,Na1+xFePO4F

Na₂FePO₄F is a promising cathode material for a Na-ion battery because of its high electronic capacity and good cycle performance. In this work, first principle calculations combined with cluster expansion and the Monte Carlo method have been applied to analyze the charge and discharge processes of Na₂FePO₄F by examining the voltage curve and the phase diagram. As a result of the density functional theory calculation and experimental verification with structural analysis, we found that the most stable structure of Na_1.5FePO₄F has the P2₁/b11 space group, which has not been reported to date. The estimated voltage curve has two clear plateaus caused by the two-phase structure composed of P2₁/b11 Na_1.5FePO₄F and Pbcn Na₂FePO₄F or Na₁FePO₄F and separated along the c-axis direction. The phase diagram shows the stability of the phase-separated structure. Considering that Na₂FePO₄F has diffusion paths in the a- and c-axis directions, Na₂FePO₄F has both innerphase and interphase diffusion paths. We suggest that the stable two-phase structure and the diffusion paths to both the innerphase and interphases are a key for the very clear plateau. We challenge to simulate a nonequilibrium state at high rate discharge with high temperature by introducing a coordinate-dependent chemical potential. The simulation shows agreement with the experimental discharge curve on the disappearance of the two plateaus. © 2018 Wiley Periodicals, Inc.     

Mn2+、N2-共掺杂Zn2GeO4晶体电子结构和光学性质的研究

采用基于密度泛函理论的平面波超软赝势方法对本征Zn2GeO4，Mn2+掺杂Zn2GeO4，Mn2+/N2-共掺杂Zn2GeO4超晶胞进行了几何结构优化，计算了掺杂前后体系的晶格常数、能带结构、态密度和光学性质。结果表明，Mn离子掺入后，Mn离子3d轨道与O离子2p轨道之间有强烈的轨道杂化效应，掺杂系统不稳定，而Mn/N离子共掺后，Mn离子和N离子之间的吸引作用克服了Mn离子之间的排斥作用，能够明显地提高掺杂浓度和体系的稳定性。光学性质计算结果表明，Mn离子与N离子共掺杂能改善Zn2GeO4电子在低能区的光学跃迁特性，增强电子在可见光区的光学跃迁；吸收谱计算结果显示，Mn离子与N离子掺入后体系对低频电磁波吸收增加。     

纵横载荷作用下功能梯度梁的弯曲和过屈曲

基于一阶非线性梁理论和物理中面概念,导出了纵横向载荷作用下功能梯度材料(FGM)梁非线性弯曲和过屈曲问题的控制方程,并获得了该问题的精确解;据此解研究了梯度材料性质、外载荷、横向剪切变形以及边界条件等因素对功能梯度材料梁非线性力学行为的影响,分析中假设功能梯度材料性质只沿梁厚度方向,并按成分含量的幂指数函数形式变化。结果表明:纵横载荷共同作用下,功能梯度梁的弯曲构形将有无限多个;随着梯度指数的增大,梁的变形减小,临界载荷升高;随着长高比的增大,横向剪切变形的影响减小。